Original: $10.00
-65%$10.00
$3.50The Story
Overview
The QualiBCT™ 20/50 is a piece of equipment made to check how much squashing large packaging materials like cartons and foam inserts can take.
As a dependable box compression test machine, it figures out the amount of weight a sample can handle and how much it deforms, which is critical information for warehouses and shipping departments. This system uses three separate force sensors to get a more balanced reading, and the top plate can be set to be either flat or self-adjusting to meet different testing standards.
Features & Benefits
-
A Very Stiff Frame: The machine is put together with a reinforced structure and a strengthened top plate, so it won't bend or warp even after being used for a long time, giving you consistent information.
-
Flexible Top Plate: You can choose between two different test setups. The top plate can be locked in a perfectly flat position, or it can be set to a self-aligning mode that adjusts to any unevenness on the sample's surface.
-
Balanced Force Readings: This box compression tester has three sensors underneath the bottom plate that work together to get a very accurate picture of how the force is spread out, especially on large items.
-
Simple to Use: Getting started is easy thanks to the straightforward control panel. It has all the basic buttons you need to move the compression plate up and down, making it very convenient to get a test ready.
-
Clear Information Display: Comes with a 7-inch color screen that shows you graphs and all the important numbers as the test is happening. You can also get extra software to look at the information in more detail and create reports.
Box Compression Tester QualiBCT™ 20/50 Technical Specifications
| Model | QualiBCT™ 20/50 | |
|---|---|---|
| Test Space | A | 100 x 100 x 120 cm |
| B | 120 x 120 x 120 cm | |
| C | 100 x 100 x 120 cm | |
| D | 120 x 120 x 120 cm | |
| Max Capacity | 20 kN | (2,000 kg) |
| 50 kN | (5,000 kg) | |
| Platen Type | Fixed / U-joint (Adjustable) | |
| Units | Force | gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), ton.f(short) |
| Pressure | Kpa, Mpa, psi,bar, mm-Aq, mm-Hg | |
| Force Resolution | 23 bits | |
| Force Precision | ±1% (with range 5~100% load cell capacity) | |
| Stroke Resolution | 0.001mm | |
| Speed | Range | 2~200 mm/min |
| Precision | ±1% | |
| PC-Port | RJ45(TCP/IP) [Software is optional] | |
| Data Sampling Rate | Max. 1200Hz | |
| Motor | DC motor | |
| Hardware Protection | Upper/ Lower limit, Emergency stop button | |
| Power | A | Single Phase 220V, 10A (110V Upon Request) |
| B | Single Phase 220V, 10A (110V Upon Request) | |
| C | Single Phase 220V, 10A (110V Upon Request) | |
| D | Single Phase 220V, 10A (110V Upon Request) | |
| Dimension (WxDxH) | A | 152 x 100 x 196 cm |
| B | 172 x 120 x 196 cm | |
| C | 152 x 100 x 196 cm | |
| D | 172 x 120 x 196 cm | |
| Weight | A | 800 kg |
| B | 985 kg | |
| C | 840 kg | |
| D | 1020 kg | |
Description
Overview
The QualiBCT™ 20/50 is a piece of equipment made to check how much squashing large packaging materials like cartons and foam inserts can take.
As a dependable box compression test machine, it figures out the amount of weight a sample can handle and how much it deforms, which is critical information for warehouses and shipping departments. This system uses three separate force sensors to get a more balanced reading, and the top plate can be set to be either flat or self-adjusting to meet different testing standards.
Features & Benefits
-
A Very Stiff Frame: The machine is put together with a reinforced structure and a strengthened top plate, so it won't bend or warp even after being used for a long time, giving you consistent information.
-
Flexible Top Plate: You can choose between two different test setups. The top plate can be locked in a perfectly flat position, or it can be set to a self-aligning mode that adjusts to any unevenness on the sample's surface.
-
Balanced Force Readings: This box compression tester has three sensors underneath the bottom plate that work together to get a very accurate picture of how the force is spread out, especially on large items.
-
Simple to Use: Getting started is easy thanks to the straightforward control panel. It has all the basic buttons you need to move the compression plate up and down, making it very convenient to get a test ready.
-
Clear Information Display: Comes with a 7-inch color screen that shows you graphs and all the important numbers as the test is happening. You can also get extra software to look at the information in more detail and create reports.
Box Compression Tester QualiBCT™ 20/50 Technical Specifications
| Model | QualiBCT™ 20/50 | |
|---|---|---|
| Test Space | A | 100 x 100 x 120 cm |
| B | 120 x 120 x 120 cm | |
| C | 100 x 100 x 120 cm | |
| D | 120 x 120 x 120 cm | |
| Max Capacity | 20 kN | (2,000 kg) |
| 50 kN | (5,000 kg) | |
| Platen Type | Fixed / U-joint (Adjustable) | |
| Units | Force | gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), ton.f(short) |
| Pressure | Kpa, Mpa, psi,bar, mm-Aq, mm-Hg | |
| Force Resolution | 23 bits | |
| Force Precision | ±1% (with range 5~100% load cell capacity) | |
| Stroke Resolution | 0.001mm | |
| Speed | Range | 2~200 mm/min |
| Precision | ±1% | |
| PC-Port | RJ45(TCP/IP) [Software is optional] | |
| Data Sampling Rate | Max. 1200Hz | |
| Motor | DC motor | |
| Hardware Protection | Upper/ Lower limit, Emergency stop button | |
| Power | A | Single Phase 220V, 10A (110V Upon Request) |
| B | Single Phase 220V, 10A (110V Upon Request) | |
| C | Single Phase 220V, 10A (110V Upon Request) | |
| D | Single Phase 220V, 10A (110V Upon Request) | |
| Dimension (WxDxH) | A | 152 x 100 x 196 cm |
| B | 172 x 120 x 196 cm | |
| C | 152 x 100 x 196 cm | |
| D | 172 x 120 x 196 cm | |
| Weight | A | 800 kg |
| B | 985 kg | |
| C | 840 kg | |
| D | 1020 kg | |
