Original: $99.00
-65%$99.00
$34.65The Story
Overview
The QualiRST™ Series is a specialized piece of stiffness testing equipment built to figure out how much thermoplastic pipes with a round cross-section can resist being squashed.
This system is perfect for running a standard ring stiffness test and can also handle flat and flexibility checks. It's an essential tool for pipe makers who need to be sure their products, like double-wall corrugated or winding pipes, are up to the job.
Features & Benefits
-
Multi-Purpose Pipe Analysis: This isn't just for a standard ring stiffness test; it's also set up to perform checks on flatness and ring flexibility, giving you a full picture of the pipe's mechanical properties.
-
Advanced Creep Simulation: Comes with a special function to mimic how large-diameter pipes buried deep in the ground lose some of their stiffness over many years, which is critical for long-term performance predictions.
-
Broad Material Compatibility: This stiffness testing equipment is made to handle a whole range of plastic pipe types, including those with double-wall corrugated designs and winding constructions.
-
European Standards Compliance: The entire series has earned its CE certification, showing that it meets all the product quality and safety rules required in the EU.
-
Dependable Performance: Built to give you consistent and accurate information, helping you make sure every pipe that leaves your facility is made to last.
Ring Stiffness Tester – QualiRST™ Series Technical Specifications
| Type | QualiRST™ 2000 | QualiRST™ 3000 |
|---|---|---|
| Creep Ratio Test (option) | ||
| Max. load | 30kN (50kN, 100kN, 200kN option) | |
| Accuracy grade | 0.5 | |
| Load resolution | 1N | |
| Load accuracy | ±0.5% | |
| Crossbeam resolution | 0.001mm | |
| Crossbeam accuracy | ±0.5% | |
| Crossbeam speed | 0.50mm~200mm/min | |
| Speed Accuracy | ±1% | |
| Pipe diameter range | Φ110mm~Φ2000mm | Φ110mm~Φ3000mm |
| Pipe scope for inner diameter measuring system | Φ200mm~Φ2000mm | Φ200mm~Φ3000mm |
| Accuracy of inner diameter measuring system | ±1% | |
| Specimen width | 1000mm | |
| Power supply | 220 (1-15%) VAC ~ 220 (1+10%) VAC 50Hz 1.0 kW (110V is also available) | |
| Dimension(L×W×H) | (650×1360×3400) mm | (650×1360×4300) mm |
| Weight | 600Kg | 700Kg |
| Constant load accuracy | ±1% | |
| Timing range | 1~9999h 59min 59s | |
| Timing resolution | 1s | |
| Timing error | 0.1‰s | |
Description
Overview
The QualiRST™ Series is a specialized piece of stiffness testing equipment built to figure out how much thermoplastic pipes with a round cross-section can resist being squashed.
This system is perfect for running a standard ring stiffness test and can also handle flat and flexibility checks. It's an essential tool for pipe makers who need to be sure their products, like double-wall corrugated or winding pipes, are up to the job.
Features & Benefits
-
Multi-Purpose Pipe Analysis: This isn't just for a standard ring stiffness test; it's also set up to perform checks on flatness and ring flexibility, giving you a full picture of the pipe's mechanical properties.
-
Advanced Creep Simulation: Comes with a special function to mimic how large-diameter pipes buried deep in the ground lose some of their stiffness over many years, which is critical for long-term performance predictions.
-
Broad Material Compatibility: This stiffness testing equipment is made to handle a whole range of plastic pipe types, including those with double-wall corrugated designs and winding constructions.
-
European Standards Compliance: The entire series has earned its CE certification, showing that it meets all the product quality and safety rules required in the EU.
-
Dependable Performance: Built to give you consistent and accurate information, helping you make sure every pipe that leaves your facility is made to last.
Ring Stiffness Tester – QualiRST™ Series Technical Specifications
| Type | QualiRST™ 2000 | QualiRST™ 3000 |
|---|---|---|
| Creep Ratio Test (option) | ||
| Max. load | 30kN (50kN, 100kN, 200kN option) | |
| Accuracy grade | 0.5 | |
| Load resolution | 1N | |
| Load accuracy | ±0.5% | |
| Crossbeam resolution | 0.001mm | |
| Crossbeam accuracy | ±0.5% | |
| Crossbeam speed | 0.50mm~200mm/min | |
| Speed Accuracy | ±1% | |
| Pipe diameter range | Φ110mm~Φ2000mm | Φ110mm~Φ3000mm |
| Pipe scope for inner diameter measuring system | Φ200mm~Φ2000mm | Φ200mm~Φ3000mm |
| Accuracy of inner diameter measuring system | ±1% | |
| Specimen width | 1000mm | |
| Power supply | 220 (1-15%) VAC ~ 220 (1+10%) VAC 50Hz 1.0 kW (110V is also available) | |
| Dimension(L×W×H) | (650×1360×3400) mm | (650×1360×4300) mm |
| Weight | 600Kg | 700Kg |
| Constant load accuracy | ±1% | |
| Timing range | 1~9999h 59min 59s | |
| Timing resolution | 1s | |
| Timing error | 0.1‰s | |
