Original: $100.00
-65%$100.00
$35.00The Story
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series
The QualiVMP™ Adv 2500 Series Video Measuring Projector delivers precise on-screen inspection with high-resolution video imaging, accurate linear scales, and integrated measurement software. Designed for dimensional checks of machined components, stamped parts, molds, and electronic assemblies, it ensures clear edge detection and reliable XY measurements.
This system enables 2.5D vision measurement and offers optional 3D contact probing and Z-axis autofocus for enhanced flexibility. Powered by iMeasuring software and compatible with Windows 10/11, it streamlines QC processes and generates detailed inspection reports with efficiency.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Applications
Machined Parts and Toolrooms
Measure hole patterns, slots, radii, and center distances efficiently during incoming inspections or in-process checks.
Stamping, Sheet Metal, and Fasteners
Confirm feature positions, edge profiles, and go/no-go conditions with high accuracy, even when tolerances are tight.
Molds, Dies, and Precision Fixtures
Inspect critical geometry such as chamfers, contours, and mating surfaces without extensive setup time.
Electronics and Small Components
Perform dimensional verification on connectors, housings, and fine features, using clear imaging to reduce operator variation.
General QA/QC and First-Article Inspection
Standardize measurement routines with software-driven programs for consistent, repeatable results across shifts.
Standards Supported – QualiVMP™ Adv 2500 Series
- ISO 10360-7 – Applicable to CMMs with imaging probing systems, providing guidance for vision-based probing performance verification.
- ISO 10360-8 – Relevant when optical distance sensors are part of the system, supporting configuration and verification procedures.
- ISO 14978 – Covers terminology and general requirements for measuring equipment, ensuring standardized practices.
- ASME B89 Series – U.S. dimensional metrology standards commonly referenced alongside ISO standards in American quality programs.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Key Features
- iMeasuring Software Workflow – Streamlines routine inspections, data capture, and reporting with a user-friendly interface.
- High-Resolution Digital Camera – Delivers clear feature targeting and consistent edge detection for precise measurements.
- 6.5X Electronic Zoom Lens – Optical magnification 0.7X–4.5X with video magnification up to ≈26X–172X on a 21.5-inch monitor.
- Precision Linear Scale Feedback – 0.5 µm resolution ensures stable and accurate XY measurements.
- Granite Base and Uprights – Reduces drift and maintains mechanical stability in demanding QC environments.
- Software-Controlled LED Illumination – Includes 4-ring / 8-zone adjustable surface lighting, LED contour/parallel illumination, and optional coaxial light for reflective surfaces.
- Configurable Measurement Options – Standard 2.5D vision measurement with optional 3D contact probing and Z-axis autofocus depending on model.
- PC-Friendly Integration – Compatible with Windows 10/11 (32/64-bit) and supports multi-language user interface for global applications.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Technical Specification
| Measurement Category | Type | Description | Model |
|---|---|---|---|
| 2.5D Vision Measuring Machine | A | Optical zoom-lens sensor | QualiVMP™ Adv 2500A Series |
| 3D Contact & Vision Measuring Machine | B | Zoom-lens sensor + contact probe sensor | QualiVMP™ Adv 2500B Series |
| 2.5D Semi-automatic Vision Measuring Machine | C | Zoom-lens sensor + Z-axis autofocus | QualiVMP™ Adv 2500C Series |
| 3D Semi-automatic Contact & Vision Measuring Machine | D | Zoom-lens sensor + contact probe + autofocus | QualiVMP™ Adv 2500D Series |
QualiVMP™ Adv 2500 Series core model
| Item | Specification |
|---|---|
| Measuring software | iMeasuring |
| Workbench | Metal workbench 408 × 308 mm |
| Glass workbench | 306 × 198 mm |
| X/Y travel | 250 × 150 mm |
| Z travel | 200 mm (high-precision linear guide) |
| Measurement accuracy | XY: ≤ 2.5 + L/200 (μm); Z: ≤ 4.0 + L/200 (μm) |
| Repeatability | 2 µm |
| Camera | 1/2.9", 1.6 Mpixel high-resolution digital camera |
| Zoom lens | 6.5X electronic feedback zoom lens; optical 0.7X–4.5X |
| Video magnification | ≈26X–172X (21.5" monitor) |
| Illumination | Surface 4-ring / 8-zone LED (software adjustable); LED contour parallel; coaxial optional |
| Supported OS | Windows 10/11 (32/64-bit) |
| Languages | English + additional language options |
| Machine dimensions (W×D×H) | 790 × 617 × 1000 mm |
| Weight (gross / net) | 242 / 175 kg |
| Recommended environment | 20°C ±2°C, humidity 30–80%RH, low vibration (per brochure conditions) |
Notes :
- L is the measured length (mm). Z-axis mechanical accuracy and focus accuracy depend strongly on the workpiece surface condition.
- Magnification values are approximate and vary with monitor size and resolution.
- Optional auxiliary objectives can be selected: 0.5× or 2×, which can extend video magnification to 13×–86× or 52×–344×.
- Working environment: 20°C ±2°C, temperature change <1°C/hr, humidity 30–80% RH, vibration <0.02 g, ≤15 Hz.
Configuration
- Type A: Optical zoom-lens sensor (2.5D vision)
- Type B: Optical + contact probe (3D contact & vision)
- Type C: Optical + Z-axis autofocus
- Type D: Optical + contact probe + Z-axis autofocus
Model range (same QualiVMP™ Adv Series)
| Model | Effective travel (X/Y/Z) | Machine dimensions (L×W×H) | Package dimensions (L×W×H) | Installation dimensions (L×W×H) |
|---|---|---|---|---|
| QualiVMP™ Adv 2000 Series | 200 / 100 / 200 mm | 677 × 552 × 998 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 2500 Series | 250 / 150 / 200 mm | 790 × 617 × 1000 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 3000 Series | 300 / 200 / 200 mm | 838 × 667 × 1000 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 4000 Series | 400 / 300 / 200 mm | 1002 × 817 × 1043 mm | 1130 × 1000 × 1270 mm | 1010 × 1460 × 1810 mm |
| QualiVMP™ Adv 5000 Series | 500 / 400 / 200 mm | 1002 × 852 × 1085 mm | 1280 × 1070 × 1470 mm | 1110 × 1500 × 1850 mm |
Configuration
- Type A: Optical zoom-lens sensor (2.5D vision)
- Type B: Optical + contact probe (3D contact & vision)
- Type C: Optical + Z-axis autofocus
- Type D: Optical + contact probe + Z-axis autofocus
Configuration List
Standard Delivery (Included)
- Measurement software
- Electronic feedback zoom lens
- Manual controller
- 4-ring / 8-zone LED illumination
- 0.5 µm enclosed grating ruler
- Dust cover
- 1/2.9" digital camera
- Dongle
- Optical calibration plate
- Data cable
- Contour LED parallel cold illumination
- Documentation set: certificate, warranty card, instruction manual, and packing list
Optional Accessories (Add-Ons)
- Instrument table
- Electronic feedback coaxial optical lens
- 3D touch probe
- Calibration ball
- Computer and monitor
- 1/1.8" color camera
- Block gauge
- 0.5× additional objective
- Foot switch
- 2× additional objective
Description
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series
The QualiVMP™ Adv 2500 Series Video Measuring Projector delivers precise on-screen inspection with high-resolution video imaging, accurate linear scales, and integrated measurement software. Designed for dimensional checks of machined components, stamped parts, molds, and electronic assemblies, it ensures clear edge detection and reliable XY measurements.
This system enables 2.5D vision measurement and offers optional 3D contact probing and Z-axis autofocus for enhanced flexibility. Powered by iMeasuring software and compatible with Windows 10/11, it streamlines QC processes and generates detailed inspection reports with efficiency.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Applications
Machined Parts and Toolrooms
Measure hole patterns, slots, radii, and center distances efficiently during incoming inspections or in-process checks.
Stamping, Sheet Metal, and Fasteners
Confirm feature positions, edge profiles, and go/no-go conditions with high accuracy, even when tolerances are tight.
Molds, Dies, and Precision Fixtures
Inspect critical geometry such as chamfers, contours, and mating surfaces without extensive setup time.
Electronics and Small Components
Perform dimensional verification on connectors, housings, and fine features, using clear imaging to reduce operator variation.
General QA/QC and First-Article Inspection
Standardize measurement routines with software-driven programs for consistent, repeatable results across shifts.
Standards Supported – QualiVMP™ Adv 2500 Series
- ISO 10360-7 – Applicable to CMMs with imaging probing systems, providing guidance for vision-based probing performance verification.
- ISO 10360-8 – Relevant when optical distance sensors are part of the system, supporting configuration and verification procedures.
- ISO 14978 – Covers terminology and general requirements for measuring equipment, ensuring standardized practices.
- ASME B89 Series – U.S. dimensional metrology standards commonly referenced alongside ISO standards in American quality programs.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Key Features
- iMeasuring Software Workflow – Streamlines routine inspections, data capture, and reporting with a user-friendly interface.
- High-Resolution Digital Camera – Delivers clear feature targeting and consistent edge detection for precise measurements.
- 6.5X Electronic Zoom Lens – Optical magnification 0.7X–4.5X with video magnification up to ≈26X–172X on a 21.5-inch monitor.
- Precision Linear Scale Feedback – 0.5 µm resolution ensures stable and accurate XY measurements.
- Granite Base and Uprights – Reduces drift and maintains mechanical stability in demanding QC environments.
- Software-Controlled LED Illumination – Includes 4-ring / 8-zone adjustable surface lighting, LED contour/parallel illumination, and optional coaxial light for reflective surfaces.
- Configurable Measurement Options – Standard 2.5D vision measurement with optional 3D contact probing and Z-axis autofocus depending on model.
- PC-Friendly Integration – Compatible with Windows 10/11 (32/64-bit) and supports multi-language user interface for global applications.
Advanced Video Measuring Projector – QualiVMP™ Adv 2500 Series Technical Specification
| Measurement Category | Type | Description | Model |
|---|---|---|---|
| 2.5D Vision Measuring Machine | A | Optical zoom-lens sensor | QualiVMP™ Adv 2500A Series |
| 3D Contact & Vision Measuring Machine | B | Zoom-lens sensor + contact probe sensor | QualiVMP™ Adv 2500B Series |
| 2.5D Semi-automatic Vision Measuring Machine | C | Zoom-lens sensor + Z-axis autofocus | QualiVMP™ Adv 2500C Series |
| 3D Semi-automatic Contact & Vision Measuring Machine | D | Zoom-lens sensor + contact probe + autofocus | QualiVMP™ Adv 2500D Series |
QualiVMP™ Adv 2500 Series core model
| Item | Specification |
|---|---|
| Measuring software | iMeasuring |
| Workbench | Metal workbench 408 × 308 mm |
| Glass workbench | 306 × 198 mm |
| X/Y travel | 250 × 150 mm |
| Z travel | 200 mm (high-precision linear guide) |
| Measurement accuracy | XY: ≤ 2.5 + L/200 (μm); Z: ≤ 4.0 + L/200 (μm) |
| Repeatability | 2 µm |
| Camera | 1/2.9", 1.6 Mpixel high-resolution digital camera |
| Zoom lens | 6.5X electronic feedback zoom lens; optical 0.7X–4.5X |
| Video magnification | ≈26X–172X (21.5" monitor) |
| Illumination | Surface 4-ring / 8-zone LED (software adjustable); LED contour parallel; coaxial optional |
| Supported OS | Windows 10/11 (32/64-bit) |
| Languages | English + additional language options |
| Machine dimensions (W×D×H) | 790 × 617 × 1000 mm |
| Weight (gross / net) | 242 / 175 kg |
| Recommended environment | 20°C ±2°C, humidity 30–80%RH, low vibration (per brochure conditions) |
Notes :
- L is the measured length (mm). Z-axis mechanical accuracy and focus accuracy depend strongly on the workpiece surface condition.
- Magnification values are approximate and vary with monitor size and resolution.
- Optional auxiliary objectives can be selected: 0.5× or 2×, which can extend video magnification to 13×–86× or 52×–344×.
- Working environment: 20°C ±2°C, temperature change <1°C/hr, humidity 30–80% RH, vibration <0.02 g, ≤15 Hz.
Configuration
- Type A: Optical zoom-lens sensor (2.5D vision)
- Type B: Optical + contact probe (3D contact & vision)
- Type C: Optical + Z-axis autofocus
- Type D: Optical + contact probe + Z-axis autofocus
Model range (same QualiVMP™ Adv Series)
| Model | Effective travel (X/Y/Z) | Machine dimensions (L×W×H) | Package dimensions (L×W×H) | Installation dimensions (L×W×H) |
|---|---|---|---|---|
| QualiVMP™ Adv 2000 Series | 200 / 100 / 200 mm | 677 × 552 × 998 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 2500 Series | 250 / 150 / 200 mm | 790 × 617 × 1000 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 3000 Series | 300 / 200 / 200 mm | 838 × 667 × 1000 mm | 1030 × 780 × 1260 mm | 850 × 1400 × 1720 mm |
| QualiVMP™ Adv 4000 Series | 400 / 300 / 200 mm | 1002 × 817 × 1043 mm | 1130 × 1000 × 1270 mm | 1010 × 1460 × 1810 mm |
| QualiVMP™ Adv 5000 Series | 500 / 400 / 200 mm | 1002 × 852 × 1085 mm | 1280 × 1070 × 1470 mm | 1110 × 1500 × 1850 mm |
Configuration
- Type A: Optical zoom-lens sensor (2.5D vision)
- Type B: Optical + contact probe (3D contact & vision)
- Type C: Optical + Z-axis autofocus
- Type D: Optical + contact probe + Z-axis autofocus
Configuration List
Standard Delivery (Included)
- Measurement software
- Electronic feedback zoom lens
- Manual controller
- 4-ring / 8-zone LED illumination
- 0.5 µm enclosed grating ruler
- Dust cover
- 1/2.9" digital camera
- Dongle
- Optical calibration plate
- Data cable
- Contour LED parallel cold illumination
- Documentation set: certificate, warranty card, instruction manual, and packing list
Optional Accessories (Add-Ons)
- Instrument table
- Electronic feedback coaxial optical lens
- 3D touch probe
- Calibration ball
- Computer and monitor
- 1/1.8" color camera
- Block gauge
- 0.5× additional objective
- Foot switch
- 2× additional objective
